< Previous10 Rust Preventives Rust Preventives Mold Shield Rust Preventive • No chlorinated solvents • Unique “dry” formula • 2-year protection* • Will not bleed out and mark parts • Neutralizes fingerprint acid • Non-silicone, non-wax formulation • Self-cleaning in start-up • Seals out condensation *Protects up to two years under normal indoor storage conditions 42910P (aerosol) 42901PB (1 gallon) 42905PB (5 gallons) 42955PB (55 gallons) No-Rust ® Rust Preventive • No chlorinated solvents • 5 year protection* • Displaces moisture while sealing mold from outside condensation • Non-silicone, non-wax formulation • Neutralizes fingerprint acids *Protects up to five years under normal indoor storage conditions 40212M (aerosol) 40201B (1 gallon) 40205B (5 gallons) 40255B (55 gallons) Quick RP Rust Preventive with Red Dye Indicator • No chlorinated solvents • Unique “dry” formula • 2-year protection* • Red tracing dye helps ensure complete coverage • Will not bleed out and mark parts • Neutralizes fingerprint acid • Non-silicone, non-wax formulation • Seals out condensation *Protects up to two years under normal indoor storage conditions 42810RP (aerosol) 42801RPB (1 gallon) 42805RPB (5 gallons) 42855RPB (55 gallons) Acid Vapor Neutralizer Rust Preventive • No chlorinated solvents • Protects molds when using PVC and flame-retardant resins • Provides dual protection against moisture and hydrochloric acids • One-step rust preventive 44011P (aerosol) 44001PB (1 gallon) 44005PB (5 gallons) 44055PB (55 gallons) White Rhino Rust Preventive • No chlorinated solvents • NSF category H1 • Ideal for mold assemblies used to produce food packaging • 2-year protection* • Neutralizes fingerprint acids *Protects up to two years under normal indoor storage conditions 46710P (aerosol) 46701PB (1 gallon) 46705PB (5 gallons) 46755PB (55 gallons) Cool-down Sweat is Rusting Your Mold Money-Saving Tips Internal water lines tend to cause the mold to sweat as condensation forms on the mold platens and cavity. Rust and oxidation can begin to form almost immediately, even before the mold can be taken out of the machine and returned to the tool room. To help prevent sweat from creating rust during cool down, simply apply Slide rust preventive to the mold cavity once temperatures are reduced. Once the mold reaches room temperature, the mold should be flushed and cleaned thoroughly with a Slide mold cleaner. Then apply a fresh coat of rust preventive.11 MRO Solutions MRO Solutions Penetrant Plus • No chlorinated solvents • Non-silicone, PTFE-based formulation • Choice of spray or stream aerosol pattern • Harmless to most plastics, rubber, paint, etc. • Displaces moisture and leaves a protective film • Penetrating formulation helps free rusted or frozen metal components • Meets California CARB VOC standards 41812M (aerosol) 41801MB (1 gallon) 41805MB (5 gallons) 41855MB (55 gallons) Tap-It • No chlorinated solvents • Produces cleaner threads • For reaming, dressing abrasive wheels, etc. • Made with natural oils • Effective on tool steel, stainless, aluminum, brass, bronze, zinc and other metals 40401B (1 gallon) 40405B (5 gallons) 40455B (55 gallons) No-Rust ® Rust Preventive • No chlorinated solvents • 5 year protection* • Displaces moisture while sealing mold from outside condensation • Non-silicone, non-wax formulation • Neutralizes fingerprint acids *Protects up to five years under normal indoor storage conditions 40212M (aerosol) 40201B (1 gallon) 40205B (5 gallons) 40255B (55 gallons) Cutting Oil • No chlorinated solvents • Formulated with high pressure additives • For drilling, cutting, sawing, tapping 41301B (1 gallon) 41305B (5 gallons) 41355B (55 gallons) Silicone Emulsion • No chlorinated solvents • Approved for indirect food contact (†) • Water-based silicone oil solution • 35% concentrate can be diluted with additional water 51932-1 (1 gallon) 51932-5 (5 gallons) 51932-55 (55 gallons) Copper Anti-Seize Compound • Protects against rust and corrosion • Resists thread damage, seizing and galling to 1800ºF/982ºC • Lowers friction and reduces torque • Compatible with most metals and plastics • Improves assembly and disassembly • Allows reuse of damaged or threaded parts • Will not harden, drip or separate • Meets performance requirements of MIL-PRF-907F 47902 (2 oz. brush top can) 47908 (8 oz. brush top can) Aluminum Anti-Seize Compound • Aluminum base is perfect for helping prevent non-similar metals from fusing together • Protects against rust and corrosion • Prevents galling and seizing • Water resistant • Reduces friction and lubricates metal surfaces to 2000ºF /1093ºC 48002 (2 oz. brush top can) 48008 (8 oz. brush top can) There is an art to effectively greasing ejector pins. Using the right grease on the front and back of the pins prevents grease from leaching out and contaminating parts. Watch the video to see which products work best and how to apply them. Go to www.slideproducts.com and improve your technique. Tip: How to properly lube ejector pins…watch the technical video! FA N O C ON TI EN E CL ORO H E C H O C ON A C EIT ES NAT URALES CUTTINGCUTTING OILOIL REINFORCED WITH HIGH PRESSURE ADDITIVES AND EXTRA COOLANT REFORZADO CON ADITIVOS DE ALTA PRESIÓN Y REFRIGERANTE EXTRA12 Purging Compounds Econo-Purge Purging Compound • Excellent purge for use through hot runner systems • Safe to purge through the mold • Operating temperatures of 338° - 572°F/140°C - 300°C • Helps eliminate color streaking and black • Effectively removes old resin and color residue in extrusion, injection and blow molding operations • Low odor 473-45 (45-lb. box) 473-1500 (1500-lb. gaylord) KLENZ Purging Compound • Excellent for use through hot runner systems • Safe to purge through the mold • Helps eliminate color streaking and black specks • Chemically reactive compound • Polyolefin resin carrier • Operating temperatures of 330° - 610°F/165°C - 321°C • For use with injection molding, extrusion and blow molding • GRAS rated active ingredients safe for food packaging applications 468-45 (45-lb. box) 468-1000 (1000-lb. gaylord) Purge-Atory Purging Compound • Recommended for use with gas emitting resins such as Delrin® and acetal • Safe to purge through the mold • Helps eliminate color streaking and black specks • Chemically reactive compound • SAN resin carrier • Operating temperatures ranging from 370° - 610°F/187°C - 321°C 470-45 (45-lb. box) 470-1000 (1000-lb. gaylord) Guide To Your Purging Needs N.P.T. P.D.Q.KLENZEcono-PurgePurge-AtoryHi-Temp Recommended for use with gas emitting resins (Delryn and Acetal) • Polyolefin resin-based formulation ••• Purging of Hot Runners •••• Color Changes •• •• •• GRAS rated ingredients (safe for use in food packaging operations) •••• Ready to use, chemically-reactive purge ••••• Mechanical purge process • Effective for removal of carbon contamination ••••• Non-abrasive (safe for barrel and screw) ••••• Odorless •••• Resin-Based Purging Solutions Hi-Temp Purge Compound • Operating temperatures of 485° - 750°F/ 250°C - 395°C • Safely clean screws and barrels • Ideal for resins such as PPS, PEEK, PET, LCP and PEI (Ultem™) • Remove burned material, color hang-ups, resin deposits, black specks and soften and remove rust • Chemically reactive, non-abrasive purge • PET carrier resin • For use with injection molding • GRAS rated (food-grade) active ingredients safe for food packaging applications • Not recommended for cleaning hot runners 478-45 (45-lb. box) 478-1000 (1000-lb gaylord) N.P.T. NuPurge Technology Purging Compound • Complete purging through reactive chemistry • No need for multiple purging products • Temp range: 160° - 600°F/71°C - 315°C • Ready to use; no mixing required • Run through gates as small as 30 microns • FDA compliant • Aids with resin-to-resin and color-to-color purges • Use with most resins • Not for use with acetal or Delrin ® 451-45 (45-lb. box) 451-1300 (1300-lb. gaylord) “Liquid” Purging Solutions P.D.Q. Liquid Purging Compound • Concentrated liquid purging compound • Water-based additive (use with barrel temperature above 212’F/100ºC) • Can be mixed with any carrier resin • Resin-to-resin and color-to-color purges • Choose self-measuring bottle or pre-measured packets • Works with a carrier resin to remove unwanted contamination from the barrel assembly 43432 (32-fl. oz. bottle) 43401 (box of 50 1-oz. bags)13 Spray Units / Delivery Systems FREEDOM “Hands Free” Automatic Spray Unit • Just plug and spray; operates autonomously from molding machinery • Easy to use, no hard wiring required, plugs directly into any 110V, 15 amp outlet • Works with Slide’s aerosol cylinder products (and liquid/bulk formulations when the pressure pot is added) • FREEDOM unit comes complete with an easy-to-program control unit, two 10-ft spray hoses with spray nozzle affixed, proximity sensor, 10-ft tank hose and 10-ft power cord • Saves molders money and time A: 43200 (standard Freedom unit) B: 43200JP (pressure pot add-on for Freedom spray unit) C: 43200M (optional set of two spray head magnets) Add arms without adding bodies Aerosol cylinder purchased separately. “Valve-Up” Giant Aerosol Cylinder This money-saving aerosol delivery system is a versatile spraying unit for use with or without automated or robotic equipment*. Slide’s aerosol cylinders contain the exact same ingredients and proportions as our aerosol can products. Molders can use a Slide aerosol cylinder with the Slide Handheld Spray Unit #43100M to create a self-contained spray system. Each cylinder equals approximately four cases of our aerosol can products. Giant Aerosol Cylinders** are offered for many Slide formulations. The Hand-Held Spray Unit (item #43100M) comes with assorted spray tips and 10-ft hose. Additional tips with wider (fan spray) or more restricted spray patterns are available. * Not installed by Slide Products, Inc. ** Cylinders may be refilled. Please contact Slide Products for details on this program. Charge-It! Refillable, Rechargeable Aerosol Spray Unit Extremely dependable, with an ultra durable nickel-plated aluminum construction, Slide’s Charge-It! can be filled with a liquid bulk product and charged with compressed air (up to 150 PSI). The valves and tips feel and spray similar to regular aerosol cans and are simple to replace at very little cost. Various spray tips and valves are also available. 43600 Air-O-Spray This easy-to-handle unit is specially designed for use with Slide bulk products. It operates entirely on the atomizing principle. Air-O-Spray has a combination internal and external action in which mold releases, mold cleaners or rust preventives can be atomized at low pressure and low mist. Any air compressor providing 50 PSI is ideal for this unit. 42202 42203 (extra bottle & cap) Sprayer and Metal Hose Recommended for all of Slide’s cylinder products. 43100M Chemical-resistant Pump Spray Bottle Package of 2 units per box. To be used with Slide bulk products. 42300 Handy Spray Can Holder Slide’s new spray can holder helps organize your space and keep cans in place. Extruded from PVC, these extremely durable can holders can easily be bolted directly onto the side of a molding machine or tool cart to hold various Slide cans. 43800 Spray anti-rust on the mold immediately at the end of production, when the mold is warm and ready to be cleaned and stored. Use a rust preventive that: Helpful Tip: How to Protect Molds • Neutralizes fingerprint acid and acid residues • Provides a self-healing film • Displaces micro droplets of water • Contains no wax or other material that builds up • Use a “dry” rust preventive when part marking is a concern and storage time is a year or less C A B14 Sample Kits / Online Store Try it for free What better way to see the effectiveness of Slide’s products than to try it right in your own plant? From the beginning, Slide has offered free samples of its products for you to test in your specific application. That way, you can see for yourself which of our many products work best for you. To make it even easier, we’ve created three standard kits that you can order. Or if you prefer, create your own sample kit by requesting the products you feel best fit your particular needs. How to get your own kit To request a kit, contact your local Slide Products distributor. You can find them using the distributor locator on our website. You can also place your order directly through our website at www.slideproducts.com/samples. Try your free samples today to see how effectively they perform and how much more productive you can be! Plastics Processors Free Sample Kit Mold Cleaner 4, Mold Shield Rust Preventive, Pure Eze Mold Release, P.D.Q. Liquid Purging Compound and Mold Cleaner Wipes Mold and Tool Builders Free Sample Kit Mold Cleaner 4, Super Grease Ejector Pin Grease, Mold & Metal Polish, No-Rust Rust Preventive and Mold Cleaner Wipes Food Packaging and Medical Molding Free Sample Kit Pure Eze Mold Release, NEXGEN Mold Cleaner, White Rhino Rust Preventive, Super Grease Ejector Pin Grease • www.slideproducts.com • Secure online ordering • Download SDS & TDS files • New product instructions • Order free samples • Technical assistance There’s More at the Online Slide StoreSample Kits What’s the real cost of your mold release? Use this formula: # Parts Released ÷ $ Per Can = Value The more you buy, the more you save. Most Slide aerosol products are available in ready-to-use liquid bulk form. Formulated using the same active ingredients found in our aerosols, bulk products can offer significant savings when compared to using aerosol products. However, please note that the carrier solvents are different. Pre-testing is recommended. Free samples are available on request. Bulk products are generally available in 3 container sizes: 1 gallon 5 gallons 55 gallons Save Money - Buy in Bulk!15 Product Index 40012N Paintable Mold Release ................................................4 40112 Regular Silicone Mold Release.....................................5 40212M No-Rust Rust Preventive ...................................10 & 11 404 Tap-It ...........................................................................11 40510P Econo-Spray 1 Mold Release .......................................4 40614 Epoxease Mold Release ...............................................7 40710P Econo-Spray 2 Mold Release .......................................4 40810P Econo-Spray 3 Mold Release .......................................4 40910P Quick Mold Cleaner ......................................................8 41012N Zinc Stearate Mold Release..........................................6 41112N DFL Dry Film Lube Mold Release.................................6 413 Cutting Oil ...................................................................11 41412 Polycarbonate Mold Release ........................................5 41612N EconoMIST Mold Release ...........................................4 41812M Penetrant Plus ............................................................11 41914 Resin Remover Mold Cleaner .......................................8 42112N SSL Mold Release ........................................................5 42202 Air-O-Spray Sprayer ..................................................13 42203 Air-O-Spray extra bottle & cap ....................................13 42612 Universal Mold Release ................................................5 42810RP Quick RP Rust Preventive ..........................................10 42910P Mold Shield Rust Preventive .......................................10 430 Silicone Remover ..........................................................9 43100M Sprayer and metal hose ..............................................13 43200 FREEDOM Spray Unit ................................................13 43200JP Pressure Pot add-on FREEDOM Spray Unit ..............13 43200M Optional magnets for FREEDOM Unit Spray ..............13 43310 PC Polish Cleaner ........................................................9 43401 P.D.Q. Portable Purging Compound ...........................12 43432 P.D.Q. Concentrated Purging Compound ...................12 43600 Charge-It! Rechargeable Aerosol ...............................13 43800 Can holder ..................................................................13 43900 Super Grease Ejector Pin Grease (non-aerosol) ..........7 43911P Super Grease Ejector Pin Grease (aerosol) .................7 44011P Acid Vapor Neutralizer Rust Preventive ......................10 44110A Hi-Temp 1800 Mold Release ........................................6 44212 On/Cycle Mold Cleaner.................................................8 44312 E/S Silicone Mold Release ..........................................6 44612 Quick Silicone Mold Release ........................................4 44712 Quick Paintable Mold Release ......................................4 44812 Quick Lecithin Mold Release ........................................4 451 N.P.T. NuPurge Technology ........................................12 45216 Mold Polish ...................................................................9 45414 Thermoset Mold Release ..............................................7 45612 Econo-Spray Mold Cleaner ...........................................8 45712N Pure Eze Mold Release ................................................4 45812H Urethane Mold Release ................................................7 46301 Mold Cleaner Wipes (single packets) ...........................8 46370 Mold Cleaner Wipes (canister) .....................................8 46410 NEXGEN Mold Cleaner ................................................8 46515 Citra Cling Mold Cleaner ..............................................9 46612N Knock Out Mold Release .............................................5 46710P White Rhino Rust Preventive .....................................10 468 KLENZ Purging Compound ........................................12 46910 Mold Cleaner 4 .............................................................8 470 Purge-Atory Purging Compound ................................12 47212 IPA IsoPropyl Alcohol Mold Cleaner .............................9 473 Econo-Purge Purging Compound ...............................12 47410 X-EMPT Mold Cleaner ..................................................8 478 Hi-Temp Purge Compound .........................................12 47908 Copper Anti-Seize Compound ....................................11 48008 Aluminum Anti-Seize Compound ................................11 51932 Silicone Emulsion 35% solids .....................................11 54912 Heavy Duty 10% Mold Release ....................................5 60882 Non-Silicone Wax Patter 3% Mold Release .................5 60883 Non-Silicone Wax Patter 5% Mold Release .................5 Product # Product PageProduct # Product Page Footnotes * 21CFR 178.3570 (†) Meets 21CFR 175.300 for release agents (††) 21CFR 178.3530 (†††) 21CFR 172.878 and 178.3620 (a) (††††) 21CFR 184.1400 (GRAS) The NSF mark assures consumers, retailers and regulators that products have been rigorously tested to comply with all standard requirements. Visit www.slideproducts.com/nsf UL file number E90952 Slide, EconoMIST, Econo-Spray, No-Rust, Quick, Resin Remover and Universal are registered trademarks of Slide Products, Inc.16 Slide Products 800-323-6433 www.slideproducts.com Orders orderdesk@slideproducts.com Help info@slideproducts.com ® The Slide Products Promise. We guarantee all SLIDE products against defects in workmanship and composition for 3 years from that date of manufacture. Our only obligation shall be to replace such quantity of product proven defective. User shall determine suitability of product for his intended use and assumes all risk and liability in connection herewith.Next >