HOME/MOLD RELEASE
MOLD RELEASE
LIGHT-DUTY MOLD RELEASE
Economist® Silicone mold release agent No. 41612N
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A light-duty, FDA approved mold release agent and approved for food machinery(++). Economist is non-staining and odorless. Recognized by UL.
LMR® Lecithin mold release agent No. 43512N
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A light-duty, non-silicone, paintable, natural, light-duty mold release agent. FDA Approved Lubricant and a direct food additive(+). Biodegradable & odorless.
Paintable light-duty biodegradable mold release agent No. 40012N
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A light-duty, paintable mold release agent permits post-production part decoration. Paint over it. Plate over it. Hot-stamp over it. Recognized by UL.
MEDIUM-DUTY MOLD RELEASE
Quick Lecithin mold release agent No. 44812E
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A medium-duty, non-silicone, paintable, all-temperature lecithin mold release agent that’s fast-drying on cold and hot molds. FDA-approved lubricant.
Quick Paintable mold release agent No. 44712E
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A medium-duty, all-temperature paintable mold release agent that’s fast-drying on cold and hot molds. Biodegradable and no chlorinated solvents.
Quick Silicone mold release agent No. 44612E
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A medium-duty, all-temperature silicone mold release agent that’s fast-drying on cold and hot molds. FDA Approved lubricant. Recognized by UL.
HEAVY-DUTY MOLD RELEASE
Polycarbonate 41412N mold release agent
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A heavy-duty, paintable mold release agent. Biodegradable & odorless. No crazing or blemishing. Recognized by UL.
Silicone mold release agent No. 40112N
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A heavy-duty, FDA approved mold release agent that provides faster molding & more production. Approved for food machinery(++). Heat-stable. Non-toxic. Recognized by UL.
Universal mold release agent No. 42612H
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A heavy-duty, non-silicone, paintable mold release. FDA approved lubricant. Colorless.
SPECIALTY MOLD RELEASES
DFL Dry Film Lube mold release agent No. 41112N
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Mold release agent formulated for deep draw molds. More durable bonded formulation. Excellent for most rubber, thermoplastics, phenolic & urethane. Contains PTFE.
E/S Environmentally Safe Paintable Lecithin mold release agent No. 44512
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A non-silicone, paintable mold release agent. FDA and USDA Approved(+) lubricant. Biodegradable and non-flammable.* Chlorine-free. Colorless, odorless, non-staining.
E/S Environmentally Safe Silicone mold release agent No. 44312
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
An FDA and USDA Approved(+++) lubricant, mold release agent. Biodegradable and non-flammable.* Chlorine-free. Colorless and non-staining.
Econo-Spray® 1 mold release agent NO. 40514
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Economical, non-paintable silicone mold release agent. Contains no methylene chloride. Approved for food machinery(++). Recognized by UL.
Econo-Spray® 2 mold release agent NO. 40714
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Economical, paintable mold release agent. No methylene chloride.
Econo-Spray® 3 mold release agent No. 40814
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Economical, non-silicone, paintable mold release agent. No methylene chloride. Food-approved(*).
Econo-Spray® 4 mold release agent No. 41016T
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Economical, zinc stearate lubricant powder mold release agent. No methylene chloride.
Econo-Spray® 5 mold release agent No. 41116T
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Economical dry film lube mold release agent. No methylene chloride. Contains PTFE.
Econo-Spray® 6 mold release agent No. 46110
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Silicone Release. No ozone depleting chemicals. Non-chlorinated. No methylene chloride. No chlorofluorocarbons (CFC's). Safe on solvent-sensitive plastics.
Econo-Spray® 7 mold release agent No. 46210
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Economical, paintable mold release agent. Non-chlorinated. No methylene chloride. Safe on solvent-sensitive plastics.
Electronic mold release agent No. 42712N
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A non-silicone, paintable mold release agent ideal for plastic electronic parts.
Heavy-Duty Mold Release and Pin Lube No. 54912
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
An ideal lubricant for the front half of ejector pins (pins in forward position,) this almost dry lubricant minimizes the possibility of leaching out onto molded parts.
Hi-Temp 1800 mold release agent No. 44110
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Contains boron nitride for molding at temperatures up to 1800F. Excellent for die-casting metals.
Knock Out non-silicone, paintable mold release No. 46612N
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A non-silicone, paintable mold release for thermoplastic and rubber compounds. Approved for indirect food contact.
Mold Saver mold release agent No. 42510
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A non-silicone, paintable mold release agent that neutralizes corrosive vapors. Prevents deposit build-up.
Pure Eze mold release agent No. 45712N
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A non-silicone, paintable, all-purpose mold release agent. Neutral white-oil-based release contains no lecithins. USDA rated H1. Recognized by UL.
Water Soluble mold release agent No. 41212N
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A non-silicone, paintable mold release agent. Permits ultrasonic welding of parts. No removal necessary, simply wash parts in H2O. Does not contain water.
Zinc Stearate mold release agent No. 41012N
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
A non-silicone, paintable mold release agent. Lubricant powder. For polycarbonates, polypropylenes, polysulfones and rubber molding.
THERMOSET MOLD RELEASES
Dura Kote mold release agent for thermosets No. 41712
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Semi-permanent mold release agent for thermosets. Excellent rotational mold release. Use for urethane & epoxy molding. Completely dry, paintable and non-flammable.
Epoxease® mold release agent No. 40616T
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Non-silicone mold release agent for thermosets. For epoxy, polyester and phenolic molding, injection molding, encapsulating, potting.
Thermoset mold release agent No. 45416T
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Mold release agent made with synthetic carnauba wax. Contains no silicones or oils.
Urethane mold release agent No. 45812H
ADD TO "MY SAMPLES"
Maximum 4 samples
per request
Non-paintable silicone mold release mold release agent for rigid, semi-rigid and flexible urethane foams. Made especially for polyurethanes. Non-toxic. No chlorinated solvents.